Product Code: SA902

Product Name: Cuttable Heat Transfer PU Flex Effect

Cutter Compatibility: conventional cutting plotters

Cutter RecommendationsCuttable Heat Transfer PU Flex Regular can be cut by all conventional cutting plotters such as : Roland CAMM-1 GR/GS-24,STIKA SV-15/12/8 desktop, Mimaki 75FX/130FX series,CG-60SR/100SR/130SR,Graphtec CE6000 etc.

Specification: 50cm X 25M, 50cm X5M/Roll, other specifications are requirement.

It is washable. You can wash for more than 100 times. it will not fall off or break no matter in cold or hot weather after you finish the transfer.

Heat press transferring：Setting heat press machine 165°C for 15~25 seconds using moderate pressure. the press should snap closed firmly.

You can cut it by Plotter or by hands. and you can heat by Heat press machine or Iron on. For Heat press machine (165°C/329°F, 25 Seconds). For Iron on (Turn off the steam button, heated for 1 Minutes.)